ProGear 300LS Owner's Manual page 22

ASSEMBLY
Tools:
Open-Ended Flat Wrench
9. Hand Pulse Handlebar Installation:
Mount the Hand Pulse Handlebar (33) onto the top support bracket of the Hand Pulse Handlebar
Support Frame (41) with two Carriage Bolts (39), two Cap Nuts (80), and two Big Curve
Washers (81). Using the Open-Ended Flat Wrench, tighten the cap nuts until they are firm and
secure.
Hardware:
(39) Carriage Bolt (80) Cap Nut
(81) Big Curve Washer
2PCS 2PCS
2PCS
20