Storage & Maintenance - ProGear Air Elliptical 1307 Owner's Manual

Regular maintenance of the equipment is necessary to extend the life and will allow it to continue to
function properly. Please keep the air elliptical, especially the computer console, out of direct
sunlight to prevent screen damage or premature wear.
Cleaning
Keep the machine clean and free of any debris by vacuuming around the moving parts and wiping the
machine down with a clean cotton cloth. The equipment can be cleaned with a soft cloth and mild detergent.
Do not use abrasives or solvents on the plastic parts. Be careful to not get excessive moisture on the
computer console display panel as such actions might cause an electrical hazard or electronics to fail.
Immediately wipe your perspiration off the elliptical equipment after each use and to keep it clean for the
next use.
Lubrication
Make sure to lubricate the moving parts of the elliptical equipment to prevent it from squeaking and help to
extend the life of the equipment.
1. Check the floor where the air elliptical sits to confirm a level and unobstructed floor. An uneven floor
could create unnecessary stress on the moving parts of the elliptical equipment, which might lead to
squeaks and premature machinery wear and tear.
2. Spray an multi-purpose or silicon-based lubricant onto the bolts that connect the handlebars to the lower
arms. The lower arms support the footpads or pedals on the elliptical equipment.
3. Spray lubricant onto the bolts connecting the foot bars to the crank and the bolts connecting the crank to
the mainframe.
Storage
Store the air elliptical in a clean and dry environment away from children and pets.
STORAGE & MAINTENANCE
26