Endorsement Paper Specification - Epson TM-J7100 Developer's Manual

Confidential
❏ Since the slip TOF sensor uses a reflective photo sensor and it detects from the back of slip
paper, do not use paper that has holes or dark portions with low reflection (less than 40%
reflection) at the sensor position.
Area where paper holes are
prohibited and reflection
rate for the back of paper
should be 40% or more.
Paper feed direction

Endorsement Paper Specification

Paper type
Paper size
Paper thickness
4-14 Specifications
15
Area with No Paper Holes and Low Reflection
High- quality paper (only single-ply paper can be used)
68 ~ 101.6mm (W) × 150 ~ 223mm (L)
0.09 ~ 0.13mm {0.0035 ~ 0.0051"} (only single-ply can be used)
30
10
Paper holes and
translucence prohibited in
this area.
[Units: mm (All the numeric values are typical.)]
{2.68 ~ 4.17" (W) × 5.90 ~ 8.98" (L)}
Rev. A