Character Specifications - Epson TM-J7100 Developer's Manual

Confidential

Character Specifications

Character Specifications
Item
Character type
Character structure
Character dimensions
Character structure
Dot configuration
H ✕ V (includes 2-dot H space)
* : Using the memory switch for characters per line
Note:
The number of characters (columns) per line is selectable by a memory switch.
Selection of characters per line can be performed for receipt and slip (including endorsement).
If memory switch changing of characters per line is performed, one dot on the right side of a graphic
character or user-defined character may be missed.
Character size
Font A (12 × 24)
Font B (9 × 17)
* Font A (11 × 24)
* Font B (8 × 17)
The actual print character may be smaller than the size shown in the table above, because the above size includes
spaces in the font.
Characters can be scaled up to 64 times as large as the standard size.
Character size not including the horizontal spacing in the standard scale is as follows:
Font A:1.41 (W) × 3.384 (H) mm
Font B: 0.987 (W) × 2.397 (H) mm
4-4 Specifications
Alphanumeric
International
Extended graphics
Font A Font B
12 ✕ 24 9 ✕ 17
Standard Double-height
W × H (mm) W × H (mm)
1.69 × 3.38 1.69 × 6.77
1.27 × 2.40 1.27 × 4.80
1.55 × 3.38 1.55 × 5.77
1.13 × 2.40 1.13 × 4.80
Specifications
95 characters
37 types
128 characters ✕ 11 pages
(including one user-defined page)
See "Character Configurations and Dimensions" table
below. (Default is Font A.)
See "Character Configurations and Dimensions" table
below. (Spaces between characters not included.)
* Font A * Font B
11 ✕ 24 8 ✕ 17
Double-width /
Double-width Double-height
W × H (mm) W × H (mm)
3.38 × 3.38 3.38 × 6.77
2.54 × 2.40 2.54 × 4.80
3.10 × 3.38 3.10 × 6.77
2.26 × 2.40 2.26 × 4.80
Rev. A