Virtual Private Lan Services Overview; Vpls Over Mpls-Tp Overview; References; Configuring Vpls Over Mpls-Tp - Cisco ASR 900 Series Manual

Virtual Private LAN Services Overview

Virtual Private LAN Services Overview
uses the provider core to join multiple attachment circuits together to simulate a virtual bridge that connects
the multiple attachment circuits together. From a customer point of view, there is no topology for VPLS. All
of the CE devices appear to connect to a logical bridge emulated by the provider core. See figure below.

VPLS over MPLS-TP Overview

VPLS over MPLS-TP allows you to deploy a multipoint-to-multipoint layer 2 operating environment over
an MPLS-TP network for services such as Ethernet connectivity and multicast video.

References

For detailed information about the commands, see:
• Cisco IOS XE 3.5 MPLS Command Reference:
• Master Command Index for Cisco IOS XE Release 3.5:

Configuring VPLS over MPLS-TP

The sections below describe how to configure VPLS over MPLS-TP:

Configuration Guidelines

VPLS over MPLS-TP is only supported on Gigabit Ethernet and Ten Gigabit Ethernet interfaces.

Configuring the MPLS Label Range

You must specify a static range of MPLS labels using the mpls label range command with the static keyword.
SUMMARY STEPS
1. enable
2. configure terminal
3. mpls label range minimum-value maximum-value{ staticminimum-static-value maximum-static-value}
MPLS Basic Configuration Guide, Cisco IOS XE Everest 16.5.1 (Cisco ASR 900 Series)
108
reference/ce_book.html
allreleasemcl/all_book.html
VPLS Configuration over MPLS-TP
http://www.cisco.com/en/US/docs/ios/cether/command/
http://www.cisco.com/en/US/docs/ios/mcl/