Table of Contents
Advertisement
161036-YIM-E-1008
This product must be installed in strict compliance with
the installation instructions and any applicable local,
state and national codes including, but not limited to
building, electrical, and mechanical codes.
Before performing service or maintenance operations on
unit, turn off main power switch to unit. Electrical shock
could cause personal injury. Improper installation,
adjustment, alteration, service or maintenance can
cause injury or property damage. Refer to this manual.
For assistance or additional information consult a
qualified installer or service agency.
Due to system pressure, moving parts, and electrical
components, installation and servicing of air conditioning
equipment can be hazardous. Only qualified, trained service
personnel should install, repair, or service this equipment.
Untrained personnel can perform basic maintenance functions
of cleaning coils and filters and replacing filters.
Observe all precautions in the literature, labels, and tags
accompanying the equipment whenever working on air
conditioning equipment. Be sure to follow all other applicable
safety precautions and codes including.
Wear safety glasses and work gloves. Use quenching cloth and
have a fire extinguisher available during brazing operations.
Nomenclature
Product Category
J = Single Package Heat Pump, R-22
Product Identifier
P = 13 SEER Heat Pump
Nominal Cooling Capacity (MBH)
024 = 2.0 Ton
030 = 2.5 Ton
036 = 3.0 Ton
Installation
Limitations
These units must be installed in accordance with the following
national and local safety codes.
2
J P 036 C 00
042 = 3.5 Ton
048 = 4.0 Ton
060 = 5.0 Ton
Heat Type & Nominal Heat Capacity
C00 = Cooling Only
Airflow
A = Standard Drive
Inspection
As soon as a unit is received, it should be inspected for possible
damage during transit. If damage is evident, the extent of the
damage should be noted on the carrier's freight bill. A separate
request for inspection by the carrier's agent should be made in
writing.
Reference
Additional information is available in the following reference forms:
• Technical Guide - 246830
• General Installation - 161036
• Electric Heat Accessory - 168708
Renewal Parts
Contact your local York
replacement parts.
This product must be installed in strict compliance with
the enclosed installation instructions and any applicable
local, state, and national codes including, but not limited
to, building, electrical, and mechanical codes.
Improper installation may create a condition where the
operation of the product could cause personal injury or
property damage.
A
1
A
AA
1 A
1 = First Generation
2 = Second Generation
Additional Options
AA = None
Installation Options
A = No Options Installed
Voltage Code
1 = 208/230-1-60
2 = 208/230-3-60
4 = 460-3-60
1.
National Electrical Code ANSI/NFPS No. 70 or Canadian
Electrical Code Part 1, C22.1 (latest editions).
2.
Local plumbing and waste water codes and other
applicable local codes.
Refer to Table 6 for unit physical data and to Table 5 for electrical
data.
®
parts distribution center for authorized
Product Style
A = Style A
Product Generation
Johnson Controls Unitary Products
Advertisement
Table of Contents
