Conformity Certificate - Bauer Magnum S Operating Manual

7 CONFORMITY CERTIFICATE

The manufacturer
Röhren- und Pumpenwerk BAUER Gesellschaft m.b.H.
Kowaldstraße 2, 8570 Voitsberg, Austria
phone +43 3142 200-0; fax: +43 3142 200-320/-340
herewith confirms that the machine mentioned below
Designation of machine
Machine type / basic units
Consists of
corresponds analogously to the requirements of the Machinery Directive 2006/42/EC.
In case of a modification of the machine not accorded with FAN GmbH, this declaration will cease to be
valid.
The following standards as amended have been applied analogously:
DIN EN ISO 12100-1
DIN EN ISO 12100-2
DIN EN 60204-1
EN ISO 14121-1
Norms related to products
EN ISO 13857
DIN EN 349
DIN EN 809
The documents belonging to the machine according to annex VII, part B have been attached.
Person in charge of documentation:
Technical Designer in Charge
Operating manual BAUER Submersible Motor Pump / Version X-2010
EC Declaration of Conformity
according to EC Directive 2006/42/EC
Safety of machines – Basic concepts, general principles for design,
Part 1: Basic terminology, metodology
Safety of machines – Basic concepts, general principles for design,
Part 2: Technical principles and specfications
Safety of machines - Electrical equipment of machines,
Part 1: General requirements
Safety of machines – Risk assessment
Safety of machines, safety clearance to secure no touching hazard area with
upper extremities.
Safety of machine, minimum clearance to avoid crushing body parts
Pumps and pump units for liquids - Common safety requirements
Thomas Theissl, Kowaldstraße 2, 8570 Voitsberg, Austria,
Submersible Motor Pump Magnum S
S4, S5,5, S7,5, S11 and S15
Submersible Motor Pump with lifting and
lowering device
Commercial Manager
19