Controls; Connections; Settings; Manual Mode - Bauer Magnum S Operating Manual

4.3.2 Controls

Mode selector with following positions:
0: Motor is switched off
1: Manual mode, the motor is switched on and off by means of the two pushbuttons.
2: Intermittent operation, the motor is controlled by timer.
Green pushbutton
Red pushbutton

4.3.3 Connections

Power supply by means of 5-pole CEE plug-in connection.
Pump connection by clamp rail.
Screw terminals for connection of alarm system (optional).

4.3.4 Settings

Timer for star-delta changeover:
Motor protection relay:
Clamp rail:

4.3.5 Manual mode


Push the green illuminated button. The motor starts up and switches from "star" to "delta" automatically
after about 3 seconds.

Push the red pushbutton. The motor stops.

4.3.6 Intermittent operation

The timer switches on the motor through the star-delta combination. After expiry of the selected operating time
the motor is switched off again automatically for the selected rest time. This sequence is repeated cyclically.
BAUER control with timer for interval operation
Logo programming
1.Time and date setting
In order to get access to the mode parameter, press the key ESC -> LOGO changes to the mode
parameter and displays the parameter menue.
Choose „SET CLOCK" key AB, AB and OK
1. Choose the day: keys up and down
2. Move the cursor to the next position: keys RIGHT, LEFT
3. Change the value: keys UP or DOWN
4. Set the clock to the correct time, repeat steps 2 and 3
5. Set the date, repeat steps 2 and 3
6. Finish the task: key OK
2.WEEKLY TIMER and INTERVAL parameter setting
Parameter blocks: B09 Interval parameter
Operating manual BAUER Submersible Motor Pump / Version X-2010
for starting the motor in manual mode.
for stopping the motor in manual mode.
The green pushbutton is alight.
B11 Weekly timer parameter
B17 Operating hours meter value
approx. 3 seconds
see drawing no. 018 2565.4 automatic reset
see drawing no. 345 9601
14