Output Condition Settings - Excell PW Service Manual

EXCELL PRECISION CO., LTD

3-5-8 Output Condition Settings

Select
Reset of Auto Transmission.
ACTIONS
Press key
TARE
Use or
ON/ZERO UNITS
keys to select the desired
setting
Press key
TARE
Key in the parameter "00"
Press the key to exit
TARE
RS232 serial interface
settings
PW Service Manual
in the RS232 serial interface setting mode
DISPLAY
NOTE
Output condition settings
The LCD shows the last setting.
Default setting:
n
Output condition settings
Use or
ON/ZERO
desired setting:
= Output all the time
= Stable weight output only
output when under/overload or unstable)
ON/ZERO key ⇒ Increment number by 1
UNITS key ⇒ Decrement number by 1
TARE key ⇒ Move cursor one place to the right
NET/GROSS key ⇒ Move cursor one place to the left
51
keys to select the
UNITS
SME300000016
to
(No