Noise Filter Settings - Excell PW Service Manual

EXCELL PRECISION CO., LTD

3-3-5 Noise Filter Settings

Select
noise filter settings.
ACTIONS
4 When modifying
Press key
TARE
Use or
ON/ZERO UNITS
key to key in the
parameters
Press key
TARE
Use or
ON/ZERO UNITS
key to key in the
parameters
Press key
TARE
Use or
ON/ZERO UNITS
key to key in the
parameters
Press key
TARE
4 In approved models,
PW Service Manual
in the general function setting mode
DISPLAY
, the parameters of
set as 1 or 3,
NOTE
Returning to zero point setting
LCD displays the last status
Returning to the zero point setting
Use or
ON/ZERO
parameters or zero point
Default setting = 0
0 ⇒ No skip
1 ⇒ skip 1d
2 ⇒ skip 2d
3 ⇒ skip 3d
4 ⇒ skip 4d
When the weight on the scale is over 1/3
n
full capacity, the function is on.
Digital switch & Stabilization range
setting
LCD displays the last parameter setting
Digital switch & Stabilization range
setting
Use or
ON/ZERO
parameters. Default setting = 0
Parameter 0 ~ 9, the larger the number the
more stable the weight.
Filter parameter setting
LCD displays the last parameter setting
Filter parameter setting
Use or
ON/ZERO
parameters. Default setting = 5
Parameter 0 ~ 9.
The larger the number is, the faster the
filter responds. Fast response can lead to
weighing instability.
setting is not available
39
to set the
remain un-altered.
key to key in the
UNITS
5 ⇒ skip 5d
6 ⇒ skip 6d
7 ⇒ skip 7d
8 ⇒ skip 8d
9 ⇒ skip 9d
keys to key in the
UNITS
keys to key in the
UNITS
SME300000016