Selection Of The Continuous Transmission Rate - Excell PW Service Manual

EXCELL PRECISION CO., LTD

3-5-5 Selection of the Continuous Transmission Rate

Select
to set the Continuous Transmission Rate.
ACTIONS
Press key
TARE
Use the or
ON/ZERO
keys to select the continuous
transmission
rate
Press key
TARE
Key in the parameter "00"
Press the key to exit
TARE
RS232 serial interface
settings
PW Service Manual
in the RS232 serial interface setting mode
DISPLAY
UNITS
NOTE
Continuous transmission rate setting
The LCD shows the last setting.
Default setting:
n
Continuous transmission rate
Use or
ON/ZERO
the continuous transmission rate:
= 1 time/sec
= 2 times/sec
= 4 times/sec
= 8 times/sec
= More than16 times/sec
ON/ZERO key ⇒ Increment number by 1
UNITS key ⇒ Decrement number by 1
TARE key ⇒ Move cursor one place to the right
NET/GROSS key ⇒ Move cursor one place to the left
48
keys to select
UNITS
= 16 times/sec
SME300000016