Carrier 42HWG009 Technical Data & Service Manual page 21

(5) Discharge Air Louver Control
Up and Down Control
The air discharge direction can be controlled to swing up and down and can be fixed at
preferred position or automatic position by the remote control.
FLAP
6
AUTO
5
4
SWING
3
2
1
Remote control
MODEL
42HWG007/009/012
HWG195C/225C/305C
42HWG018/024
HWG455C/605C
FLAP
6
AUTO
5
4
SWING
3
2
1
Remote control
MODEL
42HQG007/009/012, HWG195H/225H/305H
42HQG018/024, HWG455H/605H
• If you select the Flap position using the FLAP button in the remote control, the flap in
the unit will move to that position automatically. Once you select the position, the unit
remembers that position and whenever you turn on the unit, the flap will be positioned
to that position.
• If you select SWING, the flap will swing up and down. In the COOL, DRY and FAN
mode, the flap will swing in the cool range. In the HEAT mode, the flap will swing in the
heat range.
• If you select AUTO, the flap will position itself to the preset position according to the
operation mode.
NOTE
• Always use the remote control to adjust the flap position, otherwise it may cause
abnormal operation. Please turn off the unit and turn it on again when you manu-
ally adjust the flap out of range.
• The unit can have maximum capacity when the flap is located at position
CLOSE
6
5
4
3
2
A
1
B
Fixed
A B
54° 36°
66° 24°
CLOSE
6
5
4
3
2
A
1
B
Fixed
A B
54° 36°
66° 24°
20
6
5
4
3
Swing Range
Cooling Only Model
6
COOL
5
COOL
4
3
2
1
HEAT
Swing Range
Heat Pump Model
6
Auto Position
6
2
HEAT
Auto Position
.