Philips DVDR9000H/75 Service Manual page 63

Firmware Upgrading & Diagnostic Software
DS_SYS_VirginModeGet
Nucleus Name
Nucleus Number 1222
Description Get the virgin mode functionality status (e.g. the auto channel search upon
start-up)
Technical -
Execution Time Less than 1 second.
User Input None
Error Number
122200
122201
122202
122203
DS:> 1222
Example
122200: The Virgin Mode functionality is: ON
Test OK @
DS_SYS_DisplayFatalOn
Nucleus Name
Nucleus Number 1223
Description Turn on the display-fatal functionality which displays debug-information on the
display when encountering a fatal error condition from which could not be
recovered automatically
Technical
-
Execution Time Less than 1 second.
User Input None
Error Number
122300
122301
122302
122303
122304
122305
122306
122307
DS:> 1223
Example
122300:
Test OK @
DS_SYS_DisplayFatalOff
Nucleus Name
Nucleus Number 1224
Description Turn off the display-fatal functionality which displays debug-information on the
display when encountering a fatal error condition from which could not be
recovered automatically
Technical
-
Execution Time Less than 1 second.
User Input None
Error Number
122400
122401
122402
122403
122404
122405
122406
122407
DS:> 1224
Example
122400:
Test OK @
Issue the command to reset the bit for the virgin mode to the analogue
board
Description
Getting the virgin mode succeeded
Reading the Virgin Mode flag from NVRAM failed
Initialisation of IIC or reaching the NVRAM failed
Reading an unexpected version of the section in NVRAM
Issue the command to use the display-fatal functionality to the analogue
board
Description
Turning on the display-fatal functionality succeeded
Turning on the display-fatal functionality failed
The returned error code from the analogue board is unknown:
No DS error code known for analogue board error:
There was no response from the analogue board.
Section validation or write failed in NVRAM
Reading the section from NVRAM failed
Initialisation of IIC or reaching NVRAM failed
Issue the command to stop using the display-fatal functionality to the
analogue board
Description
Turning off the display-fatal functionality succeeded
Turning off the display-fatal functionality failed
The returned errorcode from the analogue board is unknown:
No DS errCode known for analogue board error:
There was no response from the analogue board.
Section validation or write failed in NVRAM
Reading the section from NVRAM failed
Initialisation of IIC or reaching NVRAM failed
3139 785 31681 5. EN 63