Philips DVDR9000H/75 Service Manual page 45

Firmware Upgrading & Diagnostic Software
DS_BE_FocusOn
Nucleus Name
Nucleus Number 913
Description Put the laser of the BE into focus
Technical -
-
-
Execution Time 3 seconds
User Input None
Error Number
91300
91301
91302
91303
91304
91305
91306
DS:> 913
Example
091300:
Test OK @
DS_BE_FocusOff
Nucleus Name
Nucleus Number 914
Description Turn off putting the laser of the BE into focus
Technical -
-
-
Execution Time Less than 1 second on AV2
2 seconds on AV3
User Input None
Error Number
91400
91401
91402
91403
91404
91405
91406
DS:> 914
Example
091400:
Test OK @
DS_BE_MotorOn
Nucleus Name
Nucleus Number 915
Description Turn on the turntable motor
Technical -
-
-
Execution Time Less than 1 second on AV2
4 seconds on AV3
User Input None
Error Number
91500
91501
91502
91503
91504
91505
91506
DS:> 915
Example
091500:
Test OK @
Check if an AV2 or AV3 is connected
In case of an AV2 Send the FOCUS command with parameter 0x01
In case of an AV3 Send the transparent BIT engine FOCUS command
Description
Focus on succeeded
There was a time-out while communicating
The Basic Engine returned an unexpected result
The BE returned an error code
No acknowledge received from BE
Communicating with the Basic Engine failed
Unable to enter service mode
Check if an AV2 or AV3 is connected
In case of an AV2 Send the FOCUS command with parameter 0x00
In case of an AV3 Send the transparent BIT engine FOCUS command
Description
Focus off succeeded
There was a time-out while communicating
The Basic Engine returned an unexpected result
The BE returned an error code
No acknowledge received from BE
Communicating with the Basic Engine failed
Unable to enter service mode
Check if an AV2 or AV3 is connected
In case of an AV2 Send the TURN_TABLE_MOTOR_ON command
In case of an AV3 Send the transparent BIT engine TTM command
Description
Turn table motor is on
There was a time-out while communicating
The Basic Engine returned an unexpected result
The BE returned an error code
No acknowledge received from BE
Communicating with the Basic Engine failed
Unable to enter service mode
3139 785 31681 5. EN 45