Settings: Swinger Shutdown Settings; Resetting The Touchscreen To Factory Defaults - Technicolor TCA203 Installation Manual

Home System Installation Guide
To configure the swinger shutdown:
1. From the Installer Settings menu, tap Security ® Swinger Shutdown.
The Swinger Shutdown Settings screen is displayed.
Figure 63: Settings: Swinger Shutdown Settings
2. Tap the right and left-pointing arrows to increase and decrease the number of swinger shutdown
trips (Maximum Trips).
Note: The number of trips cannot be less than 1 or exceed 6.
3. Tap Swinger Shutdown Enabled to disable this feature.
Tap Swinger Shutdown Disabled to enable this feature.

Resetting the TouchScreen to Factory Defaults

When an activated TouchScreen is reset to factory defaults, the customer's account must also be reset
by Customer Care in order for it to be reactivated.
To reset the TouchScreen:
1. Ensure you have the premise passphrase for the account.
2. From the Installer Settings menu, tap Advanced Settings ® Reset to Factory Defaults.
88