Adding A Thermostat To The Security System - Technicolor TCA203 Installation Manual

Home System Installation Guide
Step I: Adding a Thermostat to the Security System
This action can be performed after wireless sensors are installed as described on
to the Security System on page
page 121.
The Install Zones and Home Devices screen is displayed.
1. Tap Thermostats.
The Locating Thermostat Devices screen is displayed.
2. Tap Next.
The Locating Thermostat Devices screen is displayed.
3. Tap Next.
4. Reset the device to factory default to place it in Search mode.
a. Remove the cover at the top of the thermostat device.
A circuit board is displayed with a black button labeled Reset on the leftward side.
b. Press the Reset button.
The device is reset to factory default.
c. Press the Menu button twice.
d. In the tap screen, press the Mate label twice (below the radio tower icon).
50
28. You can skip this step and add a thermostat later as described on
Step F: Adding Sensors