Manage Camera Operations; Manage Peripheral Operations - Technicolor TCA203 Installation Manual

Table 7: Manage Camera Operations
Operation
Modify a camera
Change the name identifying each camera in the TouchScreen and the
Subscriber Portal.
Set or modify the zone to which the camera is assigned. When a camera is
assigned to a zone, the camera takes a series of pictures if that zone trips an
alarm.
Delete the camera Remove a camera from being man-
from the security aged by the TouchScreen (see page
system 119).
Add a camera to the Add an additional camera to the
security system TouchScreen – up to six (see page
112).
Replace a camera Swap the current camera with another one (see page 120).
Table 8: Manage Peripheral Operations
Operation
Delete a Remove a key fob from being able to access
key fob the security system (see page 130).
Add a key Find a new key fob that is available to be
fob added (see page 130).
Modify a Change the name identifying each key fob in the TouchScreen and the Subscriber Portal
key fob (see page 129).
Delete a Remove a key pad from being able to access
key pad the security system (see page 138).
Add a key Find a new key pad that is available to be
pad added (see page 135).
Modify a Change the name identifying each key pad in the TouchScreen and the Subscriber Portal
key pad (see page 135).
Installing the Security System
Description
Use these actions in sequence to reset a
sensor's IP/MAC addresses to factory
default.
Description
Use these actions in sequence to reset a
key fob's details to factory default.
Use these actions in sequence to reset a
key pad's details to factory default.
77