Adding Key Fobs To The Security System; Key Fobs: Locating Key Fobs Screen - Technicolor TCA203 Installation Manual

Step J: Adding Key Fobs to the Security System
A key fob is a mobile tool that lets customers arm and disarm their system with the press of a button.
Note: This step can be performed after Activation.
IMPORTANT: If you need to update the firmware on any key fob before adding it to the security
system, you must reset the key fob to factory defaults before adding it to the
OpenHome Converge system. This is essential so that it can receive the necessary
changes to communicate with the TouchScreen.
The Install Zones and Home Devices screen is displayed.
1. Tap Key Fobs.
The Locating Key Fobs screen is displayed.
Figure 40: Key Fobs: Locating Key Fobs Screen
2. Tap Next to begin searching for key fobs to add.
A Stop button is displayed on the Locating Key Fobs screen. The TouchScreen searches for key
fobs that are available to be added (defaulted and in Search mode).
Installing the Security System
53