Adding Key Pads To The Security System - Technicolor TCA203 Installation Manual

Step K: Adding Key Pads to the Security System
A key pad provides customers a way to enter security codes without using the TouchScreen.
Note: This step can be performed after Activation.
IMPORTANT: If you need to update the firmware on any key pad before adding it to the security
system, you must reset the key pad to factory defaults before adding it to the
OpenHome Converge system. This is essential so that it can receive the necessary
changes to communicate with the TouchScreen.
The Install Zones and Home Devices screen is displayed.
1. Tap Key Pads.
The Locating Key Pads screen is displayed.
2. Tap Next to begin searching for key pads to add.
A Done button is displayed on the Locating Key Pads screen. The TouchScreen searches for key
pads that are available to be added (defaulted and in Search mode).
Installing the Security System
57