Testing The Alarm Functionality Of The Security System; Alarm Testing: Test Alarm Screen - Technicolor TCA203 Installation Manual

Step M: Testing the Alarm Functionality of the Security System
The Test Alarm screen is displayed.
Figure 44: Alarm Testing: Test Alarm Screen
This step sends a test alarm, through the system servers, to the central monitoring station as though a
genuine alarm has been tripped.
1. Tap Test Alarm.
The TouchScreen informs you that the signal was sent to the central monitoring station. In the
event reports on the Management Portal Account Information screen (History tab and Alarms
tab), this event is reported as "alarm test mode".
2. After the test alarm has been sent, tap Next.
The Verify Signal Sent to Central screen is displayed providing a phone number to the central
monitoring station and the confirmation information of the current customer account.
Installing the Security System
65