Settings: Alarm Test Screen; Sensor Testing Operations - Technicolor TCA203 Installation Manual

Home System Installation Guide
Figure 59: Settings: Alarm Test Screen
9. Fault each additional alarm as described in the following table and ensure that it is marked as
alarm.
Table 10: Sensor Testing Operations
Sensor
Door/Window
Motion Detec-
tor
Smoke Detec-
tor
Glass Break
Detector
Key Fob
Key Pad
The TouchScreen notes that each sensor communicated an event to the TouchScreen and
initiated an alarm.
10. After all the alarms have been faulted and the system has noted it, tap Disarm.
11. Tap Next.
The Review Alarms screen is displayed showing a history of the zones in your system.
84
Open and close the door or window.
Avoid the motion detector's view for three minutes after arming the system,
then walk in front of it.
Press and hold the sensor's "Test" button until the siren sounds, approx-
imately ten seconds.
Use a glass break simulator.
Arm and disarm the system with the key fob.
Arm and disarm the system with the key pad.
Testing Process