Download  Print this page

Height Of The Presser Bar - Brother LS-1717 Service Manual

Hide thumbs


Height of the presser bar

• The clearance between the presser foot and the needle plate should be between 6.0 and 6.5mm.
1. Raise the presser foot.
2. Loosen the screw on the presser bar guide bracket.
3. Adjust the height of the presser bar.
4. Tighten the screw.
Note: Check that the presser foot and feed dogs are aligned.
- 11 -


Table of Contents

   Related Manuals for Brother LS-1717

Comments to this Manuals

Symbols: 0
Latest comments: