Download  Print this page


Needle swing (Parabola)

The sideways movement of the needle must be equal completed in the up and down motion.
When the needle is in the descending stroke sideways end movement, this at the left side, turn the zig-
zag width dial from 5 - 0 and back, the needle movement should be less than 0.1mm.
• Loosen the three zigzag base assembly screws
• Align the upper shaft gear
and the zigzag cam gear
• Tighten the three zigzag base assembly screws
- 4 -


Table of Contents

   Related Manuals for Brother LS-1717

Comments to this Manuals

Symbols: 0
Latest comments: