Note:
•
The logo image file type can be GIF, PNG, JPG, or JPEG.
•
The logo image must have a fixed height of 24 pixels. The width can be up to 199
pixels (default is 145).
•
The maximum size of the image file can be 64 Kbytes.
•
Ignore the ini Parameters option, which is located on the left pane of the Admin
page.
6.2.1.2
Replacing the Corporate Logo with Text
You can replace the logo with text. The following figure displays an example where the
logo is replaced with the text, "My Text":
To replace the logo with text:
1.
Remove the current image logo:
a.
Access the device's command shell interface, by appending "FAE" (case-
sensitive) to the device's IP address in your browser's URL address field (i.e., <IP
address>/FAE).
b.
Click Cmd Shell.
c.
In the 'Command Line' field, type the following, and then click Enter:
CTACI LOGO
2.
Create an ini file that includes the following parameter settings:
UseWebLogo = 1
WebLogoText = <your text, for example, My Text>
3.
Load the ini file using the Auxiliary Files page (see Loading Auxiliary Files on page
635).
4.
Reset the device with a save-to-flash for your settings to take effect.
6.2.1.3
Restoring the Default Corporate Logo Image
If you have replaced the default corporate logo image with a different image or with text,
you can restore the default image at any time.
To restore the default corporate logo image:
1.
Access the device's command shell interface, by appending "FAE" (case-sensitive) to
the device's IP address in your browser's URL address field (i.e., <IP address>/FAE).
2.
Click Cmd Shell.
3.
In the 'Command Line' field, type the following, and then click Enter:
CTACI LOGO
6.2.2
Customizing the Product Name
You can customize the device's product name. The name is displayed in various places in
the management interfaces, as shown below using the customized name, "My Product
Name":
User's Manual
Figure 6-23: Replacing Logo with Text
64
Mediant 4000 SBC
Document #: LTRT-42025