Voip Interfaces With Multiple Default Gateways; Configuring Static Ip Routes - AudioCodes Mediant 4000 SBC User Manual
Family of session border controllers, sbc
Hide thumbs
Also See for Mediant 4000 SBC:
- User manual (1037 pages) ,
- Hardware installation manual (40 pages) ,
- User manual (822 pages)
Table of Contents
Advertisement
User's Manual
3.
The NTP application is configured (through the ini file) to serve as OAMP applications:
EnableNTPasOAM = 1
4.
DiffServ table:
•
Layer-2 QoS values are assigned:
♦
♦
♦
♦
•
Layer-3 QoS values are assigned:
♦
♦
♦
♦
11.5.3.4 VoIP Interfaces with Multiple Default Gateways
Below is a configuration example using default gateways per IP network interface. In this
example, the default gateway for OAMP is 192.168.0.1 and for Media and Control it is
200.200.85.1.
Application
Index
Type
0
OAMP
Media &
1
Control
A separate Static Routes table lets you configure static routing rules. Configuring the
following static routing rules enables OAMP applications to access peers on subnet
17.17.0.0 through the gateway 192.168.10.1 (which is not the default gateway of the
interface), and Media & Control applications to access peers on subnet 171.79.39.0
through the gateway 200.200.85.10 (which is not the default gateway of the interface).
Destination
17.17.0.0
171.79.39.0
11.6
Configuring Static IP Routes
The Static Routes table lets you configure up to 30 static IP routing rules. Static routes let
you communicate with LAN networks that are not located behind the Default Gateway that
is specified for an IP network interface in the IP Interfaces table, from which the packets
Version 7.2
For packets sent with DiffServ value of 46, set VLAN priority to 6
For packets sent with DiffServ value of 40, set VLAN priority to 6
For packets sent with DiffServ value of 26, set VLAN priority to 4
For packets sent with DiffServ value of 10, set VLAN priority to 2
For Media Service class, the default DiffServ value is set to 46
For Control Service class, the default DiffServ value is set to 40
For Gold Service class, the default DiffServ value is set to 26
For Bronze Service class, the default DiffServ value is set to 10
Table 11-12: Configured Default Gateway Example
Interface
IP Address
Mode
IPv4
192.168.0.2
Manual
IPv4
200.200.85.14
Manual
Table 11-13: Separate Static Routes Table Example
Prefix Length
16
24
Prefix
Default
Length
Gateway
16
192.168.0.1
24
200.200.85.1
Gateway
192.168.10.1
200.200.85.10
137
11. Network
Ethernet
Name
Device
100
Mgmt
200
CntrlMedia
Underlying Device
100
200
Mediant 4000 SBC
Advertisement
Table of Contents
