Replacing The Corporate Logo; Replacing The Corporate Logo With An Image - AudioCodes Mediant 4000 SBC User Manual

User's Manual
6.2.1

Replacing the Corporate Logo

You can replace the default corporate logo image (i.e., AudioCodes logo) that is displayed
in the Web interface. The logo appears in the following Web areas:

Web Login screen:

Menu bar:
You can replace the logo with one of the following:

A different image (see Replacing the Corporate Logo with an Image on page 63)

Text (see Replacing the Corporate Logo with Text on page 64)
6.2.1.1

Replacing the Corporate Logo with an Image

You can replace the logo with a different image.

To customize the logo:
1. Save your new logo image file in a folder on the same PC that you are using to access
the device's Web interface.
2. In your browser's URL address field, append the case-sensitive suffix "/AdminPage" to
the device's IP address (e.g., http://10.1.229.17/AdminPage).
3. Log in with your credentials; the Admin page appears.
4. On the left pane, click Image Load to Device; the right pane displays the following:
5. Use the Browse button to select your logo file, and then click Send File; the device
loads the file.
6. On the left pane, click Back to Main to exit the Admin page.
7. Reset the device with a save-to-flash for your settings to take effect.
Version 7.2
Figure 6-20: Corporate Logo on Web Login Screen
Figure 6-21: Corporate Logo on Menu Bar
Figure 6-22: Customizing Web Logo
63
6. Web-Based Management
Mediant 4000 SBC