Customizing The Favicon - AudioCodes Mediant 4000 SBC User Manual

Note:
•
You can customize the tab to display the IP address, only if a logo image is used
in the Web interface (see Replacing the Corporate Logo with an Image on page
63).
•
If you are using the default AudioCodes corporate logo image in the Web
interface, you can only customize the tab to display "AudioCodes" or the IP
address.
•
You can customize the tab to display some other text instead of "AudioCodes",
only if you are using a non-AudioCodes logo image in the Web interface.
•
If you have replaced the corporate logo image with text (see Replacing the
Corporate Logo with Text on page 64), the same text is used for the tab.

To replace the browser tab label with the IP address:
1. Create an ini file that includes the following parameter settings:
UseWebLogo = 1
WebLogoText =
Note:
from the ini file. If you have configured it before, then set it to an empty value, as
shown above.
2. Load the ini file using the Auxiliary Files page (see Loading Auxiliary Files on page
635).
3. Reset the device with a save-to-flash for your settings to take effect.

To customize the text of the browser tab label:
1. Create an ini file that includes the following parameter settings:
•
To replace the default text:
UseWebLogo = 1
WebLogoText = <your text, for example, Hello>
•
To restore the default text ("AudioCodes"):
UseWebLogo = 0
2. Load the ini file using the Auxiliary Files page.
3. Reset the device with a save-to-flash for your settings to take effect.
6.2.4

Customizing the Favicon

You can replace the default favicon (i.e., AudioCodes) with your own personalized favicon.
Depending on the browser, the favicon is displayed in various areas of your browser, for
example, in the URL address bar, on the page tab, and when bookmarked:
User's Manual
If you have never configured the WebLogoText parameter, you can omit it
66
Mediant 4000 SBC
Document #: LTRT-42025