Adding A Predialed Telephone Number To The Directory; Reviewing Directory Entries - VTech CS6449 User Manual

Directory

Adding a predialed telephone number to the directory

You can save a predialed telephone number to the directory.
Using a cordless handset:
1. Enter the telephone number in idle mode.
• Use the dial pad keys to enter up to 30 digits.
2. Press /SELECT to edit the number.
MENU
– Press or to move the cursor to the left or right.
– Press /DELETE to erase a digit.
MUTE
– Press and hold /DELETE to erase all digits.
MUTE
– Press and hold REDIAL/PAUSE to enter a three-second dialing pause
(a p appears).
– Copy a number from the redial list by pressing REDIAL/
or , or pressing REDIAL/
number to copy. Press
MENU
3. Press /SELECT again to edit the name (see To edit an entry on
MENU
pages).
4. Press /SELECT to save the number to the directory. There is a
MENU
Using the telephone base:
1. Enter the telephone number in idle mode.
• Use the dial pad keys to enter up to 30 digits.
2. Press MENU/SELECT to edit the number.
– Press / or / to move the cursor to the left or right.
CID
– Press X/DELETE to erase a digit.
– Press and hold X/DELETE to erase all digits.
– Press and hold /PAUSE to enter a three-second dialing pause
REDIAL
(a p appears).
– Copy a number from the redial list by pressing REDIAL/PAUSE then
/ or / , or pressing REDIAL/
CID
the number to copy. Press
MENU
3. Press /SELECT again to edit the name (see To edit an entry on
MENU
pages).
4. Press /SELECT to save the number to the directory. There is a
MENU
then
PAUSE
repeatedly to locate the
PAUSE
/SELECT to copy the number.
repeatedly to locate
PAUSE
/SELECT to copy the number.
47
Directory

Reviewing directory entries

Using a cordless handset or telephone base:
1. Press / on a cordless handset or press /
if there are no directory entries.
-OR-
Press MENU/SELECT when in idle mode, then press
handset, or press / or / on the telephone base to scroll to >Directory.
CID
Press MENU/SELECT twice.
2. Press or on a cordless handset, or press
base
letter in the name.
If the telephone number in the directory exceeds 15 digits, <* appears in front of
the telephone number. Press TONE
number or press # (pound key) to move towards the beginning of the telephone
number.
on the telephone base when
Directory empty appears
or on a cordless
/ or / on the telephone
CID
to move towards the end of the telephone
48