Advertisement
DETECTOR
ADBI-60 Base [for MXL/MXL-IQ and IXL (ICON-1)]
FP-11 w/DB-ADPT
FPT-11w/DB-ADPT
ID-60I
ID-60IA
ID-60IAH
ID-60IH
ID-60T
ILP-1
ILP-2
ILPT-1
ILT-1
ADBI-60 Base (for XL3)
DI-X3
DI-X3H
DI-AX3
DI-AX3H
DT-X3
ILP-1
ILPT-1
ADB-3 Base
DI-3
DI-3H
DI-A3
DI-A3H
DT-3P
PE-3
PE-3T
in the InstallationlWiring Diagrams above and wired to the specific system
modules and control panels following the appropriate instructions. For opera-
tion with System XL3 and System MXL/MXL-IQ, note any limitations on the
number of audible bases permitted on each AA-30U, AE-30U, SPX-1, MMB-1/
2, SMB-1/2, or CSM-4 audible circuit, depending on the total cable resistance
for each audible signal circuit. (See ELECTRICAL RATINGS section.)
DETECTOR MOUNTING
(USING THE ADBI-60 AND ADB-3 BASES)
The detector base comes from the factory prewired. All signaling and initiating
circuits are connected directly to the back of the ADBI-60 or ADB-3 audible
base using the four-position terminal blocks.
Note:
The Audible Base Models ADBI-60 and ADB-3 attach only to a
4-inch square, deep, electrical box.
TABLE 1
INSTALLATION INSTRUCTIONS
P/N 315-095921-3
P/N 315-095921-3
P/N 315-090287-2
P/N 315-090287-2
P/N 315-090287-2
P/N 315-090287-2
P/N 315-090288-2
P/N 315-092594-3
P/N 315-095028-3
P/N 315-092594-3
P/N 315-093336-1
P/N 315-083534D
P/N 315-086587B
P/N 315-085388F
P/N 315-086588B
P/N 315-084125C
P/N 315-092594-3
P/N 315-092594-3
P/N 315-081943-15
P/N 315-081943-15
P/N 315-081943-15
P/N 315-081943-15
P/N 315-084401-5
P/N 315-090875-6
P/N 315-090875-6
11
Advertisement
