130 Ohm Resistive Signal Pin (Orange) And Ground Blade Assembly - Agilent Technologies 1156A User Manual

Operating the Probe

130 Ohm Resistive Signal Pin (Orange) and Ground Blade Assembly

130 Ohm Resistive Signal Pin (Orange) and Ground Blade
Assembly
This configuration is ideal for general purpose probing of circuit boards with high
frequency analog or digital waveforms. This configuration produces a probing
bandwidth of 1.7 GHz or rise time of 205 ps.
Probing using the 130 Ω resistive signal pin (orange) and ground blade assembly
Orange-colored resistive signal pin
The 1156A probe has an input impedance which varies with frequency. The
following schematic shows the circuit model for the input impedance of the probe
when using the 130 Ω resistive signal pin (orange) and ground blade.
25