Table Of Contents - Agilent Technologies 1156A User Manual

Contents
1 General Information
To inspect the probe 7
Accessories Supplied 8
Replaceable Parts and Additional Accessories 10
!
Characteristics and Specifications 11
General Characteristics 12
To use the probe 14
Probe handling considerations 14
Cleaning the probe 14
Using Probe Accessories 15
To connect the probe 16
2 Operating the Probe
110 Ohm Resistive Signal Pin (Green) and Solderable Ground
Socket 21
130 Ohm Resistive Signal Pin (Orange) and Ground Blade
Assembly 25
5 cm Resistive Signal Leads and Solderable SMT or Solderable
Through-hole Ground Pin 29
Socket-end 10 cm Resistive Signal Lead and Solderable SMT or
Solderable Through-hole Ground Pin 33
Micro Clip 37
Undamped Accessories 37
3 Service
Service Strategy 42
To return the probe to Agilent Technologies for service 43
Troubleshooting 44
Failure Symptoms 44
Probe Calibration Fails 44
Incorrect High Frequency Response 44
Incorrect Low Frequency Response (pulse flatness) 45
Incorrect Input Resistance 45
Incorrect Offset 45
Offset Will Not Zero 45
Verifying probe input resistance 46
3