What To Do If - Motorola MTH800 Feature User Manual

What to do if...

Your MTH800 flashes the following messages:
Messages
...-Rcvd
Attachment Failed The MTH800 could not perform talkgroup attachment. The
Authenticate
Failure
Battery Flat
Call Canceled
Call Ended
Call Preempted
Connection to
Server Lost
Emgcy In Use:
Wait For Mic
Emgcy Mic Ended The Hot Microphone timer has automatically expired, or the
Emgcy Mic On
Empty Entry
Faulty Unit Error... Self-test failed. An operational fault has been detected with
168
Message Description
Call received but not answered, or rejected.
MTH800 keeps on trying. If it does not succeed, try another
talkgroup.
The MTH800 could not register on an Authenticated system
(for example, the Authentication key is incorrect, or
Authentication is disabled in the MTH800).
The battery is uncharged. Recharge the battery.
Called MTH800 cancelled the call.
• Faulty channel. Please try later.
• Called MTH800 ended the call.
Channel being used for priority.
This is triggered by a WAP server sending session disconnect.
The Hot Microphone feature is active, but the channel transmit
grant has been given to another Emergency Call on the same
talkgroup. The MTH800 microphone is not active during this
time, but the MTH800 will automatically try to regain talk permit
after a predetermined time.
user has pressed the PTT button to cancel the Hot Microphone
feature.
The Hot Microphone feature is active, and the MTH800 is
automatically transmitting hands free emergency audio.
The speed number you dialled does not exist, or the number
exists but the group is non-selectable.
your MTH800. Record the error number. Turn your MTH800 off
and contact service.