Dialing On Receiving A Call; Making A Private Ppc (Pre-Emptive Priority Call) - Motorola MTH800 Feature User Manual

Receiving a DMO Private Call
When a DMO Private Call is received, the
call is started immediately without need to
accept it by the called party.
1. Press PTT to talk back and start talking.
2. The call ends after a pre-programmed time,
or if you press
If the called party presses
suspended for a specified time and in case the calling party is
still transmitting the call is joined again.

Dialing on receiving a call

Dialing process is not changed for the Group Call. Otherwise
display is changed accordingly to the incoming call type and
after the call display returns to where the dialing process was
left.
When an Emergency Call is received, then dialing is aborted
and Emgcy In Use display appears.

Making a Private PPC (Pre-emptive Priority Call)

This feature is only available if set up by your Service Provider.
1. Enter the private number and press PTT
or .
2. If the display shows the called user is busy,
press Yes to interrupt the on-going call.
3. You will hear a ringing tone. Wait for the
called person to answer your call.
4. Continue the call as in a regular half-duplex or full-duplex
Private Call.
64
.
the DMO private call is
Prvt In Use
David
1234
David
Busy
Interrupt?
Yes No