What To Do If - Motorola HDT 600 Owner's Manual

What to Do If

Problem
HDT 600 does
not turn on
HDT 600 red
LED does not
stop blinking
or battery
refuses to
charge
HDT 600 does
not detect scan
input
18
Table 3: Troubleshooting
Cause
Battery not charged
HDT 600 in Sus-
pend mode
HDT 600 is not
locked in Cradle
Battery tempera-
ture is incorrect
Bad battery
LASER beam does
not cover the entire
barcode symbol
Unreadable bar-
code
Solution
Ensure proper battery instal-
lation in HDT 600.
Charge or replace the battery
Press the Power Button
Reinstall HDT 600 in Cradle.
Lock the HDT 600 properly
in Cradle (See that the HDT
600 and Cradle red LEDs are
on) and charge for 6 hours
Ensure that the battery is in a
temperature range 32
113 (0 to 45 C) and will
°F ° °
charge properly
Replace battery
Scan again and make sure
that the entire barcode sym-
bol is covered
Be sure the barcode symbol
is not covered
°F to