Motorola MTH800 Feature User Manual page 138

not attached) and priority (if pre-programmed).
4. Press Back to return to the previous display. Then, if
required, press
from the scan list or change its priority.
If the Network List is empty, it will not be displayed.
Editing Scan Lists
1. From the main menu,
select More > Group
Setup > Scan > Scan
Lists.
2. Scroll to the required
scan list. Press View to see the groups used in the scan list.
Press Back to return to the previous display.
3. To edit/view the contents of a scan list, press
4. In the List Optns sub-menu, scroll to the required option
and press Select.
The options below cannot be used for the Network List.
If the Network List is empty, it will not be displayed.
• Rename the active scan list. (For details on text editor
use, see "Writing Text" on page 160). Enter a new name
(alias) and press Ok. The display shows the new
setting.
• Check the capacity of the active scan list (number of
groups stored in the list).
• To Clear all groups from the selected scan list, press
Yes. You will be prompted to remove all groups from the
selected scan list.
• Add a group to the selected scan list. Every added
group (including a favourite group) comes with its folder,
its name or number, and its priority (if pre-programmed).
130
.
You can select to delete the group
Scan Lists
Scan List 1
Scan List2
Network List
View Back
List Optns
Rename
Capacity
Clear List
Add Group
Edit
Select Back
.