The Stylus; Notification Leds - Opticon H-19R User Manual

Table of Contents

Advertisement

OPTICON
To prompt the instruction for cold boot,
Power button immediately until the cold boot screen appears. You
following steps:
Pressing the left key of the 5-way navigation key to format user store.
Pressing the right key of the 5-way navigation key to format DiskOnChip.
Press the up key of the 5-way navigation key to format both user store and
DiskOnChip.
Press any other key to exit.

The Stylus

Use the stylus to tap a selection, to drag-and-drop an item, to write, or to draw on
the touch screen.
Tap and hold the stylus on the screen, the
submenu is displayed.

Notification LEDs

The device has 2 notification LEDs: the left is Wi-Fi/Bluetooth LED and the right is GSM/Battery
LED.
Bluetooth/Wi-Fi LED tells you about the device's Bluetooth/Wi-Fi status:
Color
Green
Blue
Green and blue blink alternately while both Bluetooth and Wi-Fi are on.
GSM/Battery LED lets you know that you have unanswered calls or tells you about the device's
GSM/battery status:
Color
Missed Call/
Low Power
Red
Blink
Orange
Off
Green
Off
User Manual
Preliminary
press the Reset button, and then press and hold the
Bluetooth on
Off
Blink
GSM on
GSM on
(battery full)
(battery low)
Off
Blink
Off
Off
Blink
Off
15
Version
Date
can then choose one of the
icon is displayed and then a pop-up
Wi-Fi on
Blink
Off
Charging
Off
Constantly on
Off
:
1.0
: 2008/05/20

Advertisement

Table of Contents
loading

Table of Contents