Janome HD2200 Instruction Book page 33

b
!4
n
b Raise and release the foot, and re-attach it
with the left side pin.
Starting just below zipper bottom stop, sew
across fabric to about 1 cm (3/8˝) distance
from the basting line.
Turn fabric 90 degrees and sew a seam
the entire length of the zipper tape. Before
reaching the slider, stop the machine with
needle in fabric and raise the foot. Use seam
ripper to open a few inches of basting stitch.
!3
!3 Unstitch basting
!4 1 cm (3/8˝)
n Unzip a few inches to clear a path for
stitching.
At end of seam, sew a few stitches in reverse
to lock. Once both sides of zipper are sewn,
use the seam ripper to open the basting
stitch.
29