Set The Security (Wpa-Psk) - NEC MH240 Setup Manual

Set the Security (WPA-PSK):

Factory Default: OPEN
STEP1: Go to "Config" menu.
STEP2: Press
STEP3: Press
STEP4: Press
STEP5: Press
STEP6: Press
STEP7: Edit TKIP or AES Key (ASCII) and then press "OK" soft key.
STEP8: Press
(See "PLACE THE PHONE IN CONFIG
to view Profile Select menu.
key to select a profile you want to set security and then press "OK" soft key.
to go to Security setting screen.
key to select "WPA-PSK" and then press
key to select an encryption "1.TKIP" or "2.AES" and then press
to save.
1.DEFAULT
2.<Profile2>
3.<Profile3>
4.<Profile4>
Delete
key.
1.TKIP
2.AES
abcdefghij123
12
11
MODE")
Prof. Select
OK
Security
OPEN
WEP
WPA-PSK
WPA2-PSK
WPA
WPA-PSK
AES
OK Clear
Back
key.