Config Password Settings; Set The New Config Password; Change The Config Password - NEC MH240 Setup Manual

• CONFIG PASSWORD SETTINGS

This section explains the Config Password for the phone. The following items are covered here.

Set the New Config Password

Change the Config Password

Set the New Config Password:
STEP1: Press
STEP2: Edit New Config Password (4 digits) and then press "OK" soft key.
STEP3: Press
NOTE: This procedure is available only when MH240 has been initialized.
Change the Config Password:
STEP1: Go to "Config" menu.
STEP2: Press
STEP3: Enter current Config Password and then press "OK" soft key.
STEP4: Enter New Config Password and then Press "OK" soft key.
STEP5: Press
to go to New Config Password edit screen.
to return to Standby mode.
(See "PLACE THE PHONE IN CONFIG
to go to Old Password confirmation screen.
to return to Standby mode.
27
Password
New Password:
12 OK
MODE")
Password
Old Password:
12 OK
Password
New Password:
12 OK
0000
Clear
****
Clear
9999
Clear