Grizzly G0727 Owner's Manual page 28

H5685—4" Rotary Table w/Clamps
This is the perfect rotary table for all model mak-
ers and those doing smaller, precision work. It
features a whole degree scale on the dial, worm
gear drive, lash adjustment screw, reference lines
and ball bearing rotary support. Comes supplied
with 2 each: 6mm clamping studs (2
T-nuts, clamping straps and steps.
Figure 31. H5685 4" Rotary Table w/Clamps
G1646—12 Piece Set, Precision R8 Collets
Made from the highest grade steel available for
a collet manufacturer, these R8 collets are preci-
sion-ground to very close tolerances.
Figure 32. G1646 12-Pc. R8 Collet Set.
-26-
G5649—5-C Spin Index
Fitted with a traveling spindle and collar, the 5-C
Spin Index is unmatched for forming, grinding,
and inspecting end mills and other fluted cutting
tools. This spin index accepts 5-C collets up to
1 ⁄ " capacity and features a 36 hole indexing
1
8
⁄ " long), plate with 10 vernier holes for indexing to 1°.
3
8
Locking spindle is hardened and ground and has
2 ⁄ " of travel.
1
16
H8257—Primrose Armor Plate with Moly-D
Machine and Way Oil 1 Quart
This superior machine and way lubricant prevents
stick slip and chatter due to anti-friction capa-
bilities resulting in greater precision machining
capabilities. Provides the thinnest oil film pos-
sible while effectively providing needed lubrication
and rust/corrosion protection. Adhesive/cohesive
components are added for vertical surfaces.
Resists squeeze out, running, dripping and non-
gumming.
"This is good stuff!
I use it on my lathes
at home."
S. Balolia – President
Figure 34. Primrose Armor Plate Lubricant.
Figure 33. G5649 5-C Spin Index.
Model G0727 (Mfg. Since 7/11)