Planmeca Compact i Touch Quick Manual page 4

Motorised headrest control
Foot control
Short activation
Normal mode
On Off
Long activation
Tilt mode
On Off
Programming
Control panel
Patient chair autoposition settings
Move chair Switch operating
to required position light On/Off
Unit settings
Most programming follows this simple sequence:
Start programming
Instrument settings
Most programming follows this simple sequence:
Activate instrument
Time and date settings
Start Select
programming time and date
www.planmeca.com
Normal mode
Anatomical movement down
Tilt mode
Tilt headrest backward
Touch screen is unlocked. Press to lock.
Start
programming
Select function
Start programming
Select function
For detailed instructions, please see the user's manual. Copyright Planmeca. Rights for changes reserved.
Normal mode Lengthen headrest
Tilt mode
Move headrest up
C
A
D
Normal mode Shorten headrest
Tilt mode Move headrest down
Touch screen is locked. Press and hold to unlock.
The function is enabled.
Press chair positions
button
The function is enabled.
Adjust value
The function is enabled.
Select function Adjust value
The function is enabled.
Select format
Normal mode
Anatomical movement up
B
Tilt mode
Tilt headrest forward
The function is disabled.
Accept new
Select autoposition
autoposition
The function is disabled.
Accept new value
The function is disabled.
Accept new value
The function is disabled.
Accept
Adjust value
new value