System Configuration Screen Options - Dell Latitude 7390 2-in-1 Owner's Manual

Option Description
Boot sequence
•
options
•
Boot list options
•
•
Advanced Boot This option allows you the legacy option ROMs to load. By default, the Enable Legacy Option ROMs is disabled.
Options Enable Attempt Legacy Boot is disabled by default.
UEFI boot path
•
security
•
•
Date/Time Allows you to change the date and time.

System Configuration screen options

Option Description
SATA Operation Allows you to configure the internal SATA hard-drive controller. The options are:
•
•
•
Drives Allows you to configure the SATA drives on board. All drives are enabled by default. The options are:
•
•
•
SMART Reporting This field controls whether hard drive errors for integrated drives are reported during system startup. This
technology is part of the SMART (Self-Monitoring Analysis and Reporting Technology) specification. This option is
disabled by default.
•
USB Configuration
This is an optional feature.
This field configures the integrated USB controller. If Boot Support is enabled, the system is allowed to boot any
type of USB Mass Storage Devices—HDD, memory key, floppy.
If USB port is enabled, device attached to this port is enabled and available for OS.
If USB port is disabled, the OS cannot see any device attached to this port.
The options are:
•
•
Windows boot manager
WindowsIns
Legacy
UEFI—selected by default
Always, except internal HDD
Always
Never
Disabled
AHCI
RAID On: This option is enabled by default.
SATA-2 — enabled by default
M.2 PCIe SSD-0 — enabled by default
M.2 PCIe SSD-1 — enabled by default
Enable SMART Reporting
Enable USB Boot Support—enabled by default
Enable External USB Port—enabled by default
System setup 49