Post Behavior Screen Options - Dell Latitude 7390 2-in-1 Owner's Manual

Option Description
Advanced Battery This option enables you to maximize the battery health. By enabling this option, your system uses the standard
Charge charging algorithm and other techniques, during the non work hours to improve the battery health.
Configuration
Disabled
Default setting: Disabled
Primary Battery Allows you to select the charging mode for the battery. The options are:
Charge
•
Configuration
•
•
•
•
If Custom Charge is selected, you can also configure Custom Charge Start and Custom Charge Stop.
Type-C connector
•
power
•

POST behavior screen options

Option Description
Adapter Warnings Allows you to enable or disable the system setup (BIOS) warning messages when you use certain power adapters.
Default setting: Enable Adapter Warnings
Keypad Allows you to choose one of two methods to enable the keypad that is embedded in the internal keyboard.
(Embedded)
•
•
Numlock Enable Allows you to enable the Numlock option when the computer boots.
Enable Network. This option is enabled by default.
Fn Key Emulation Allows you to set the option where the Scroll Lock key is used to simulate the Fn key feature.
Enable Fn Key Emulation (default)
Fn Lock Options
Allows you to let hot key combinations Fn + Esc toggle the primary behavior of F1–F12, between their standard
and secondary functions. If you disable this option, you cannot toggle dynamically the primary behavior of these
keys. The available options are:
•
•
•
Fastboot Allows you to speed up the boot process by bypassing some of the compatibility steps. The options are:
54 System setup
Adaptive—enabled by default
Standard—Fully charges your battery at a standard rate.
ExpressCharge—The battery charges over a shorter time using Dell's fast charging technology.
Primarily AC use
Custom
NOTE: All charging mode may not be available for all the batteries. To enable this option, disable the
Advanced Battery Charge Configuration option.
7.5 Watts
15 Watts—enabled by default
Fn Key Only—default.
By Numlock
NOTE: When setup is running, this option has no effect. Setup works in Fn Key Only mode.
Fn Lock—enabled by default
Lock Mode Disable/Standard—enabled by default
Lock Mode Enable/Secondary