ABB LS4000 Operating Instructions Manual page 69

Installing the
focusing screen
LS4000, LS4060 DIODE LASER ANALYZERS | OI/LS4000/O2-EN REV. A
Install the laser pointer as follows:
Step Procedure
1 Place the purging flange flat gasket 2 into the groove of the purg-
ing flange 4.
2 Place the laser pointer 1 on the purging flange 4.
3 Fasten the laser pointer 1 using the clamp 3.
No. Meaning
Focusing screen
1
Purging flange flat gasket
2
Clamp
3
Purging flange
4
Install the focusing screen as follows:
Step Procedure
1 Place the purging flange flat gasket 2 into the groove of the purg-
ing flange 4.
2 Place the focusing screen 1 onto the purging flange 4.
3 Fasten the focusing screen 1 using the clamp 3.
69