ABB LS4000 Operating Instructions Manual page 111

Installing a junction
box with a built-in
power supply
LS4000, LS4060 DIODE LASER ANALYZERS | OI/LS4000/O2-EN REV. A
No. Meaning
Junction box
1
Power supply housing
2
Proceed as follows:
Step Procedure
1 Install the junction box and the PSU housing with 8 appropriate
fittings.
For the installation, use suitable screws and dowels for securely
bearing four times the weight of the junction box (4 x approx.
10 kg = approx. 40 kg).
2 Close the junction box.
111