ABB 650 series Engineering Manual page 90

Section 6
Local HMI engineering
84
IEC05000611 V1 EN
Figure 59: GDE: Object properties windows for text insertion
The single line diagram screen can display different values, with
the help of the dynamic text fields. Please remember that these
values are displayed by default in SI units (for example - active
power is displayed in W). Modify the Scale Factor in the object
properties (see
(for example MW). Be sure to write the proper unit under the Unit
Text field.
As the function delivers angles in radians, a scale factor of 180/pi =
57,3 shall be used to display the angle in degrees
IEC10000174 V1 EN
Figure 60: GDE: Object properties window for unit change
Figure 60) to display values in more readable units
IEC10000174.vsd
1MRK 511 261-UEN -
en05000611.vsd
650 series
Engineering Manual