Section 6
Local HMI engineering
70
R
Y
G
R
Y
G
Ack
Illumination =>
= Steady
IEC08000398 V1 EN
Figure 49:
LHMI LED operation mode LatchedAck-F-S Ack Prio / 1
When more than one color is used the rules for priority are valid. Two basic
principles are:
•
Two or more signals are still ON when the LED is acknowledged.
•
All colors (signals) are acknowledged and they will illuminate in steady
state.
•
Incoming additional signals with lower priority will illuminate when
they become the highest priority in steady mode.
•
One or more signals with higher priority are changing to ON after an
acknowledgement.
•
The higher priority color (signal) will illuminate in flash mode.
See
Figure 49
and
Figure 50
R
Y
G
R
Y
G
Ack
Illumination =>
= Steady
IEC08000399 V1 EN
Figure 50:
LHMI LED operation mode LatchedAck-F-S Prio / 2
= Flash
IEC08000398.vsd
for these two principles.
= Flash
IEC08000399.vsd
1MRK 511 261-UEN -
650 series
Engineering Manual