ABB 650 series Engineering Manual page 46

Section 4
Setting up a project
40
IED Type, IED Version, IP Address of IED and Order Number,
see Figure 23. It is possible to Cancel the insertion or confirm the
configuration and do the insertion with Finish
IEC09000664 V3 EN
Figure 23: PCM600: IED Setup completion wizard
It is not possible to go back and do any modifications in the setup
complete page. If an error is detected, the insertion has to be
canceled and the IED has to be inserted again.
When the online configuration is completed, it is advised to read
the configuration from the IED to ensure that the IED object in
PCM600 has the same configuration data as the physical IED.
1MRK 511 261-UEN -
IEC09000664_3_en.vsd
650 series
Engineering Manual