Changing Fcw And Active Braking Status - Jeep Grand Cherokee 2016 Owner's Manual

To turn the FCW system back ON, press the forward
collision button again to turn the system ON.
Changing the FCW status to "OFF" prevents the system
from warning you of a possible collision with the vehicle
in front of you.
NOTE: The FCW system state is kept in memory from
one ignition cycle to the next. If the system is turned OFF,
it will remain off when the vehicle is restarted.

Changing FCW And Active Braking Status

The FCW Sensitivity And Active Braking Settings are
programmable through the Uconnect System. Refer to
"Uconnect Settings" in "Understanding Your Instrument
Panel" for further information.
The default status of FCW is the "Medium" setting and
the Active Braking is in the "On" setting. This allows the
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 231
system to warn the driver of a possible collision with the
vehicle in front using audible/visual warnings and it
applies autonomous braking.
Changing the FCW status to "Far" setting allows the
system to warn the driver of a possible collision with the
vehicle in front using audible/visual warning when the
latter is at a farther distance than Medium setting. This
provides the most reaction time to avoid a possible
collision.
Changing the FCW status to the "Near" setting, allows
the system to warn the driver of a possible collision with
the vehicle in front when the distance between the
vehicle in the front is much closer. This setting provides
less reaction time than the "Far" and "Medium" settings,
which allows for a more dynamic driving experience.
3