Display Warnings And Maintenance - Jeep Grand Cherokee 2016 Owner's Manual

216 UNDERSTANDING THE FEATURES OF YOUR VEHICLE
Adaptive Cruise Control Ready
When ACC is activated but the vehicle speed setting has
not been selected, the display will read "Adaptive Cruise
Control Ready."
Push the SET + or the SET- button (located on the steering
wheel) and the following will display in the DID:
ACC SET
When ACC is set, the set speed will display in the
instrument cluster.
The ACC screen may display once again if any ACC
activity occurs, which may include any of the following:
• System Cancel
• Driver Override
• System Off
• ACC Proximity Warning
• ACC Unavailable Warning
• The DID will return to the last display selected after
five seconds of no ACC display activity

Display Warnings And Maintenance

"Wipe Front Radar Sensor In Front Of Vehicle"
Warning
The "ACC/FCW Unavailable Wipe Front Radar Sensor"
warning will display and also a chime will indicate when
conditions temporarily limit system performance.
This most often occurs at times of poor visibility, such as
in snow or heavy rain. The ACC system may also become
temporarily blinded due to obstructions, such as mud,
dirt or ice. In these cases, the DID will display "ACC/
FCW Unavailable Wipe Front Radar Sensor" and the
system will deactivate.